The head part is only 0.5mm, nearly flat. Innovative space and weight saving screw. Incomplete threaded part is very short which enables you to make stable fastening on thin plate. Extremely light Aluminum and Colored Aluminum 310Slim are also in stock. Best for Robot and Drone assembly.
BEST SCREW FOR THIN PLATE FASTENING
Flat Head screw is not applicable on thi plate since you will not have enough space for countersinking. 310Slim achive nearly flat surface without the head sticking out like truss or pan head screws.
COMPACT DESIGN UNDERHEAD “R” & “UN-THREADED” PART
310Slim will help to optimize a compact design. Underhead “R” & “Un-threaded” part is designed very small to have bearing surface wide.
Small “R” = Small clearance hole = Wide bearing surface => Stable Fastening
Small “un-threaded” part = Fully threaded under the head => Best for thin plate fastening
2 RECESS TYPES “6-LOBE” AND “QUA”
“6-Lobe”(Hexalobular) is a standard recess as it is well know in JIS or ISO(JIS B1015/ ISO10664). Therefore, tools are easily can be purchased anywhere at your local DIY stores, hardwear supplier, and needless to say, at SAIMA online shop.
GOOD TORQUE TRANSMISSION
310Slim has “6-lobe” or “Qua” recess to make the head part extreamely thin. Both recess have good torque transmission rather than the others such as cross recess, hex socket and the bit fits in to the recess perfectly even the recess designed shallow. As a result, you can replace from standard machine screw to 310Slim today.
ALL OUR STOCK PLATING GUARANTEE
■ Steel 3Cr plating => 5μm over thickness
■ Steel Nickel plating => Cu + Ni
ALL OUR STOCK HEAD STRENGTH GUARANTEE
310Slim can be used as same fastening torque as standard 4.8 machine screw that is certified by the above chart. Easy to replace from standard machine screws. Please see the chart. As per our plating, 5μm+ thickness for steel 3Cr and and Cu+Ni plating for steel nickel plating.
SEARCH BY MATERIAL and RECESS(LINK to Size List)
- 6-lobe is a standard recess as it is well known in JIS or ISO(JIS B1015/ISO10664). Tools are easily can be purchased anywhere at your local DIY stores, hardwear supplier, and needless to say, at SAIMA online shop.
- Advanced cross recess which works perfectly if special “QUA” bit applied. You can also use standard cross recess driver for your convenience.
TOOLS and ASSORTMENT BOX(LINK to Size List)
|・Body||・Injury prevention||・Injury prevention|
|・Relative Equipment Fastening||・Safety||・Safety|